Overview

The Nexus Automatic System can be installed on Nexus 220 and
320 filters manufactured after 2006, whether on gravity-fed or
pump-fed installations.
The kit includes a control box which connects up to an automated
waste valve, airpump control box and an automatic inlet slide plate
(for gravity fed models only). Once installed and connected to your
pond pump and mains power the system will carry out cleaning
cycles at timed intervals or when pressing the manual clean button.

Nexus Automatic 

Cleaning Cycle

The Nexus Automatic System will control the cleaning cycle fully automatically. Cleaning is done on a timer, which is factory set to clean once every 3 days, however, this is easily adjustable to fit in with your pond requirements. The Nexus Automatic System will run a cleaning cycle which lasts approximately 10 minutes.

The generally accepted practice is that when you keep ornamental fish, whether in a pond or in an aquarium, to keep the water fresh, 10% of the volume of the water in the pond/aquarium should be changed on a weekly basis. With this in mind, we recommend that you set your Nexus Automatic system to run a cleaning cycle so as to exchange water in line with this.general parameters of our ponds is turn over rate. This is the time that it takes for the total volume of the pond to pass through the filter system once. We recommend that for ideal performance a turn over rate of every 2 to 3 hours is found to be best.

Nexus Automatic Manual

Pond Brochure